Hakkında

Bu sayfanın koordinasyonu Akdeniz Üniversitesi Ziraat Fakültesi Tarım Makinaları ve Teknolojileri Mühendisliği Bölümü'nden Prof. Dr. Can ERTEKİN tarafından yapılmaktadır. Sayfa, Selçuk Üniversitesi Teknik Eğitim Fakültesi Elektronik ve Bilgisayar Eğitimi Bölümü'nden Öğr. Gör.Dr. M. Nevzat ÖRNEK hocamıza ait sunucu kullanılarak Akdeniz Üniversitesi Teknik Bilimler Meslek Yüksekokulu Bilgisayar Programcılığı Bölümü'nden Öğr. Gör. Abdülkadir KOÇER tarafından hazırlanmıştır.

Arama

Arama yapmak için her hangi bir kelime giriniz...

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Power Requirements of Stem Canola Cutting
Power Requirements of Stem Canola Cutting
B. HOSEINZADEH, A. ESEHAGHBEYGI
Anahtar Kelimeler : Canola, Shear strength, Stem cutting, Nitrogen
Key Words : Canola, Shear strength, Stem cutting, Nitrogen

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Evaluation of Turkey’s Tractor Population in terms of Economic Life
Evaluation of Turkey’s Tractor Population in terms of Economic Life
İ. AKINCI, M. ÇANAKCI, D. YILMAZ, H. K. ÇELİK
Anahtar Kelimeler : Tractor, Tractor population, Economic life
Key Words : Tractor, Tractor population, Economic life

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Factors, which Influence the Hourly Fuel Consumption of the Tractors at Superficial Tillage Conditions
Factors, which Influence the Hourly Fuel Consumption of the Tractors at Superficial Tillage Conditions
B. V. AVARVAREI, R. ROŞCA, E. L. CHELARIU
Anahtar Kelimeler : Soil type, plough type, working speed, hourly fuel consumption
Key Words : Soil type, plough type, working speed, hourly fuel consumption

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Effect of Working Speed, Plough and Soil Type on the Traction Resistance of Plough at Superficial Tillage Conditions
The Effect of Working Speed, Plough and Soil Type on the Traction Resistance of Plough at Superficial Tillage Conditions
B. V. AVARVAREI
Anahtar Kelimeler : Soil and plough type, working speed, traction resistance of plough.
Key Words : Soil and plough type, working speed, traction resistance of plough.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Different Tillage Methods on the Sugar Beet Growth Monotonousness for Mechanized Harvesting
Effect of Different Tillage Methods on the Sugar Beet Growth Monotonousness for Mechanized Harvesting
G. GAHRAMANIAN, A.T. FAR
Anahtar Kelimeler : Harvesting, Uniformity, Sugarbeet, Tillage
Key Words : Harvesting, Uniformity, Sugarbeet, Tillage

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Mathematical Modeling of Cyclic Vacuum Fluctuations in Milking Clusters
Mathematical Modeling of Cyclic Vacuum Fluctuations in Milking Clusters
H. ÖZ, T. GÜNHAN, A. DEĞİRMENCİOĞLU, H. BİLGEN
Anahtar Kelimeler : Milking machines, milking clusters, vacuum fluctuations, mathematical modeling
Key Words : Milking machines, milking clusters, vacuum fluctuations, mathematical modeling

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Soil Physical Properties and Yield of Sugar Beet As Affected By Residue Management and Various Tillage Methods
Soil Physical Properties and Yield of Sugar Beet As Affected By Residue Management and Various Tillage Methods
G. GAHRAMANIAN, A. R. DIDAR, N. SEDAGAT
Anahtar Kelimeler : Tillage management, Sugar beet, Yield.
Key Words : Tillage management, Sugar beet, Yield.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Performance and Emissions of Cottonseed Oil Methyl Ester in A Diesel Engine
Performance and Emissions of Cottonseed Oil Methyl Ester in A Diesel Engine
H. BAYINDIR, H. AYDIN
Anahtar Kelimeler : Alternative fuel, Cottonseed oil, Bio-diesel, Engine performance, Emissions
Key Words : Alternative fuel, Cottonseed oil, Bio-diesel, Engine performance, Emissions

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Design and Development of a Dibble Punch Planter for Precision Planting
Design and Development of a Dibble Punch Planter for Precision Planting
M. DOWLATI, H. H. ALIZADEH, M. JAHANGIRI
Anahtar Kelimeler : Precision planting, Dibble punch planter, Pneumatic
Key Words : Precision planting, Dibble punch planter, Pneumatic

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Laboratory and Field Evaluation of a Pneumatic Punch Planter
Laboratory and Field Evaluation of a Pneumatic Punch Planter
M. DOWLATI, S. H. KARPARVARFARD, M. R. KAMANDAR
Anahtar Kelimeler : Precision, Punch planter, Evaluation, Planting
Key Words : Precision, Punch planter, Evaluation, Planting

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Effect of Slip Torque on Gearbox Design of ITM 8200 Series Tractor
The Effect of Slip Torque on Gearbox Design of ITM 8200 Series Tractor
M. R. KAMANDAR, M. DOWLATI
Anahtar Kelimeler : Design, slip torque, gearbox, tractor, engine torque
Key Words : Design, slip torque, gearbox, tractor, engine torque

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Performance and Characteristics of Low speed CI Engine Using Blends of Diesel Fuel and Rapeseed Methyl Ester as Biodiesel
Performance and Characteristics of Low speed CI Engine Using Blends of Diesel Fuel and Rapeseed Methyl Ester as Biodiesel
H. M. MEIGHANI, M. ALMASSI
Anahtar Kelimeler : Biodiesel, RME, Engine Performance test, Efficiency
Key Words : Biodiesel, RME, Engine Performance test, Efficiency

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Field Evaluation of Grain Loss Monitor in Different Harvesting Conditions on Combine JD 955
Field Evaluation of Grain Loss Monitor in Different Harvesting Conditions on Combine JD 955
M. R. M. SARKARI
Anahtar Kelimeler : wheat, grain loss, combine, monitor, harvesting
Key Words : wheat, grain loss, combine, monitor, harvesting

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Design of Electronic-Based Measurement System for Seed Spacing Measurement in Precision Planters
Design of Electronic-Based Measurement System for Seed Spacing Measurement in Precision Planters
Z. B. BARUT, K. YİĞİT
Anahtar Kelimeler : Precision planter, seed spacing, spacing uniformity, sensor, micro-controller
Key Words : Precision planter, seed spacing, spacing uniformity, sensor, micro-controller

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Assessing the Effect of Tillage Method and Ground Speed on Performance of Some Kind of Seed Tubes Using Automatic Seed Detector and Counter System
Assessing the Effect of Tillage Method and Ground Speed on Performance of Some Kind of Seed Tubes Using Automatic Seed Detector and Counter System
R. RAHIMI, M. A. E. NIK, M. J. S. DAVOUDI, N. KHADEMOLHOSSEINI, J. R. FAR, N. KAZEMI
Anahtar Kelimeler : Seed tube, Seed detector and counter system (ESDCS), seed spacing
Key Words : Seed tube, Seed detector and counter system (ESDCS), seed spacing

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Design and Development of a Reversible Disk Plow
Design and Development of a Reversible Disk Plow
S. I. SAEDI, M. H. AGHKHANI, A. FARZAD
Anahtar Kelimeler : Daniel mechanism, dimensional analysis, force analysis, kinematical analysis, mechanism optimization, reversible disk plow
Key Words : Daniel mechanism, dimensional analysis, force analysis, kinematical analysis, mechanism optimization, reversible disk plow

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A Study of the Effect of Parameters in Design and Construction of Hay Bale Trailer
A Study of the Effect of Parameters in Design and Construction of Hay Bale Trailer
H. RABBANI, E. EBRAHIMI
Anahtar Kelimeler : Trailer, Design, Construction, Hay Bale, Baler, Solid works
Key Words : Trailer, Design, Construction, Hay Bale, Baler, Solid works

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Performance comparison of fossil and bio-fuels
Performance comparison of fossil and bio-fuels
O. MISERQUE, M. CASTELEYN, J. BRUART, B. HUYGHEBAERT
Anahtar Kelimeler : biofuels, performances, exhaust gazes, fuel consumption
Key Words : biofuels, performances, exhaust gazes, fuel consumption

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A New Theory Regarding the Vegetal Matter Displacement on Shaker Straw Walkers Disposed on Two Axes at Conventional Cereal Harvesting Combines
A New Theory Regarding the Vegetal Matter Displacement on Shaker Straw Walkers Disposed on Two Axes at Conventional Cereal Harvesting Combines
G. IVAN, S. POPESCU
Anahtar Kelimeler : harvesting combines, straw walkers shaker, new theory
Key Words : harvesting combines, straw walkers shaker, new theory

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Investigation and Technical Comparison of New and ConventionalWheat Combines Performance to Improve and Modification
Investigation and Technical Comparison of New and ConventionalWheat Combines Performance to Improve and Modification
M. R. M. SARKARI
Anahtar Kelimeler : rds: combine, performance, wheat, improvement, conventional
Key Words : rds: combine, performance, wheat, improvement, conventional

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Evaluation of Applicability of Controlled Traffic for Common Cropping Systems in Turkey
Evaluation of Applicability of Controlled Traffic for Common Cropping Systems in Turkey
S. ARSLAN, T. KORUCU, E. BAŞER
Anahtar Kelimeler : Controlled traffic, cropping system, soil compaction, Turkey
Key Words : Controlled traffic, cropping system, soil compaction, Turkey

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Alternative Applications to Chemical Defoliants
Alternative Applications to Chemical Defoliants
E. ŞİMŞEK, M. B. COŞKUN
Anahtar Kelimeler : Cotton, cotton mechanization, thermal defoliator
Key Words : Cotton, cotton mechanization, thermal defoliator

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Modelling the Droplet Size of an Air-assisted Sprayer
Modelling the Droplet Size of an Air-assisted Sprayer
Y. D. YILJEP, E. T. GYUSE, J. K. SIMONIYAN, H. ISHAKU, H. I. AHMAD
Anahtar Kelimeler : Droplet size, air velocity, air-assisted, modelling, impact, sprayer
Key Words : Droplet size, air velocity, air-assisted, modelling, impact, sprayer

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Bale Density and Moisture Content on the Losses of Baled Alfalfa
Effect of Bale Density and Moisture Content on the Losses of Baled Alfalfa
S. AFZALINIA, A. MASUMI, A. KARIMI, D. MOHAMMADI
Anahtar Kelimeler : alfalfa, bale density, alfalfa moisture content, alfalfa losses
Key Words : alfalfa, bale density, alfalfa moisture content, alfalfa losses

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Investigation and comparison of electrostatic and micronair sprayers with conventional spraying in apple orchards
Investigation and comparison of electrostatic and micronair sprayers with conventional spraying in apple orchards
F. AMIRSHAGHAGHI, H. MOHAMMADI
Anahtar Kelimeler : Electrostatic, micronair, spraying,apple
Key Words : Electrostatic, micronair, spraying,apple

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Soil Quality Improvement under Extreme Climatic Conditions
Soil Quality Improvement under Extreme Climatic Conditions
L. BOTTLIK, A. STINGLI, M. BIRKÁS, A. PERCZE
Anahtar Kelimeler : soil quality, tillage, climate, water, aggregation, carbon flux, mitigation
Key Words : soil quality, tillage, climate, water, aggregation, carbon flux, mitigation

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Construction and Investigation A Prototype of 4-Way Automatic Leveling System in Order To Use in Hill Side Conditions
Construction and Investigation A Prototype of 4-Way Automatic Leveling System in Order To Use in Hill Side Conditions
F. AMIRSHAGHAGHI, F. RASOULI, M. TEIMOURI
Anahtar Kelimeler : 4-way leveling, automatic, construction,slope,evaluation
Key Words : 4-way leveling, automatic, construction,slope,evaluation

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Design and Development of a Variable-Rate Seeder: A Study of Time Response
Design and Development of a Variable-Rate Seeder: A Study of Time Response
M. JAFFARI, A. HEMMAT, M. SADEGHI, R. AMIRFATTAHI
Anahtar Kelimeler : grain drill, response time, PWM, variable rate applicator, metering mechanism
Key Words : grain drill, response time, PWM, variable rate applicator, metering mechanism

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Evaluation of the Effect of Planting Pattern on Corn Yield and Increasing Irrigation Efficiency in Salty Sandy Lands
Evaluation of the Effect of Planting Pattern on Corn Yield and Increasing Irrigation Efficiency in Salty Sandy Lands
M. BARZEGARI, S. R. A. ZADEH, A. AMELI
Anahtar Kelimeler : Furrow planting, irrigation level, corn yield
Key Words : Furrow planting, irrigation level, corn yield

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Study on Tillage Methods Affecting the Forage Corn Production
The Study on Tillage Methods Affecting the Forage Corn Production
M. H. RAZZAGHI, H. R. SADEGHNEZHAD, A. GHODSVALI
Anahtar Kelimeler : Forage corn, Herbicide energy requirement index, Weed control
Key Words : Forage corn, Herbicide energy requirement index, Weed control

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Effect of Seedbed Preparation and Grain Drill Speed on Seed Emergence Index and Wheat Yield
The Effect of Seedbed Preparation and Grain Drill Speed on Seed Emergence Index and Wheat Yield
M. H. RAZZAGHII, A. JAVADI, M. SALEHI
Anahtar Kelimeler : Emergence Index, Grain Drill Speed, seed bed preparation, Wheat
Key Words : Emergence Index, Grain Drill Speed, seed bed preparation, Wheat

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Effect of Different Tillage Methods on Corn, Soybean, Sunflower and Sesame Protein, Oil and Ash Content
The Effect of Different Tillage Methods on Corn, Soybean, Sunflower and Sesame Protein, Oil and Ash Content
A. SESSİZ, T. SÖĞÜT
Anahtar Kelimeler : Tillage, second crop corn, soybean, sunflower, sesame, protein, oil content
Key Words : Tillage, second crop corn, soybean, sunflower, sesame, protein, oil content

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Equipment and Application Techniques Reduced Agricultural Pesticide Drift
Equipment and Application Techniques Reduced Agricultural Pesticide Drift
İ. TOBİ, R. SAĞLAM, M. M. TURGUT
Anahtar Kelimeler : Pesticide spray drift, modern nozzle technology, meteorological conditions
Key Words : Pesticide spray drift, modern nozzle technology, meteorological conditions

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Load and Inflation Pressure Effects on Tractive Performance of Tractor Tires
Load and Inflation Pressure Effects on Tractive Performance of Tractor Tires
H. KÜÇÜKSARIYILDIZ, K. ÇARMAN
Anahtar Kelimeler : Slip, tractive efficiency, drawbar pull, drawbar power, dynamic traction ratio
Key Words : Slip, tractive efficiency, drawbar pull, drawbar power, dynamic traction ratio

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Computer Aided Simulation of Four-Bar Linkage Harvest Mechanism for Red Chilli Pepper of K.Maraş
Computer Aided Simulation of Four-Bar Linkage Harvest Mechanism for Red Chilli Pepper of K.Maraş
O. E. AKAY, M.T. ÖZCAN
Anahtar Kelimeler : Red Chilli pepper, mechanically harvest, four-bar linkage, kinematic simulation
Key Words : Red Chilli pepper, mechanically harvest, four-bar linkage, kinematic simulation

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Machine Parameters on a Bagasse Discharging Prototype Machine
Effect of Machine Parameters on a Bagasse Discharging Prototype Machine
A. ASGHARI, R. ALIMARDANI, A. AKRAM, H. KARPARVAR
Anahtar Kelimeler : Bagasse, Auger speed, Air flow, Soil organic materials, Discharge rate
Key Words : Bagasse, Auger speed, Air flow, Soil organic materials, Discharge rate

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Determination of Safety Level of Some Sprayers Manufactured in Turkey
Determination of Safety Level of Some Sprayers Manufactured in Turkey
Y. B. YURTLU, B. Ö. KOÇTÜRK, A. T. SERİM
Anahtar Kelimeler : safety, agriculture, sprayer
Key Words : safety, agriculture, sprayer

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Modeling of Hand-Harvesting Team for Some Vegetables
Modeling of Hand-Harvesting Team for Some Vegetables
S. UĞURLUAY, M. T. ÖZCAN
Anahtar Kelimeler : modeling, hand harvesting, labor
Key Words : modeling, hand harvesting, labor

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Comparison of two Native and two Foreign Almond Cultivars in Fruit Detachment Percent
Comparison of two Native and two Foreign Almond Cultivars in Fruit Detachment Percent
M. ZABOLESTANI, M. B. KHORSHIDI, A. SALEKZAMANI
Anahtar Kelimeler : Fruit detachment Percentage, Almond , Mechanical Trunk Shaker, Shaking Amplitude, and Frequency
Key Words : Fruit detachment Percentage, Almond , Mechanical Trunk Shaker, Shaking Amplitude, and Frequency

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Furrow Openers on Penetration Resistance of Soil
Effect of Furrow Openers on Penetration Resistance of Soil
D. KARAYEL, A. ÖZMERZİ
Anahtar Kelimeler : Seeder, Furrow Opener, Penetration Resistance of Soil, Furrow Compaction
Key Words : Seeder, Furrow Opener, Penetration Resistance of Soil, Furrow Compaction

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Performance Evaluation of Shoe-type Furrow Opener for Reduced Tillage and Direct Sowing Conditions
Performance Evaluation of Shoe-type Furrow Opener for Reduced Tillage and Direct Sowing Conditions
D. KARAYEL, A. ÖZMERZİ
Anahtar Kelimeler : Furrow opener, Sowing, Tillage, Direct Sowing
Key Words : Furrow opener, Sowing, Tillage, Direct Sowing

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Evaluation of Losses on Corn (Zea Mays) Combine Harvester as Effected by Operational Conditions under Khuzestan Climate Condition, Southwest Iran
Evaluation of Losses on Corn (Zea Mays) Combine Harvester as Effected by Operational Conditions under Khuzestan Climate Condition, Southwest Iran
N. MORVARIDI, M.A. ASOODAR, N.A. KHADEMALHOSSEINI
Anahtar Kelimeler : Corn harvesting, Loss, Combine harvester, Feeding rate
Key Words : Corn harvesting, Loss, Combine harvester, Feeding rate

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Working Width Optimisation of the Plough Bodies
Working Width Optimisation of the Plough Bodies
A. VILDE, A. RUCINS
Anahtar Kelimeler : plough body width, specific draft resistance, optimisation of parameters
Key Words : plough body width, specific draft resistance, optimisation of parameters

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Efficacy Test in Rapeseed Mechanical Harvest
Efficacy Test in Rapeseed Mechanical Harvest
M. FEDRIZZI, A. ASSIRELLI, A. CIRIELLO
Anahtar Kelimeler : operating experience, energy crops, harvesting
Key Words : operating experience, energy crops, harvesting

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Quality Of Spraying In Apple Orchard
Quality Of Spraying In Apple Orchard
O. MOSTADE, L. JAMAR, B. HUYGHEBAERT, O. Miserque, O. PIGEON
Anahtar Kelimeler : tunnel sprayer, air induction nozzles, deposits, distribution, image analysis
Key Words : tunnel sprayer, air induction nozzles, deposits, distribution, image analysis

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Biomass and Seeds Optimal Valorization in Cynara Cardunculus Mechanical Harvest
Biomass and Seeds Optimal Valorization in Cynara Cardunculus Mechanical Harvest
M. Fedrizzi, F. Gallucci, L. Pansini
Anahtar Kelimeler : Cynara Cardunculus, energy crop, direct combining, separate harvest
Key Words : Cynara Cardunculus, energy crop, direct combining, separate harvest

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Field Experiment Results of an Prototype Developed Equipment for the Acceleration of Fiber Sorghum Drying
Field Experiment Results of an Prototype Developed Equipment for the Acceleration of Fiber Sorghum Drying
L. PARI, M. Fedrizzi, A. ASSIRELLI
Anahtar Kelimeler : fibre sorghum, harvesting, energy crops, haymaking, mower-conditioner
Key Words : fibre sorghum, harvesting, energy crops, haymaking, mower-conditioner

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A Study on the Selection of an Appropriate Spray Nozzle for a Tunnel-type Electrostatic Sprayer
A Study on the Selection of an Appropriate Spray Nozzle for a Tunnel-type Electrostatic Sprayer
İ. H. CELEN, G. G. AVCI, M. R. DURGUT, E. KILIC
Anahtar Kelimeler : Air assisted sprayers, Deposit, Losses, Spraying, Tunnel sprayers
Key Words : Air assisted sprayers, Deposit, Losses, Spraying, Tunnel sprayers

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Evaluating of Milking Parlor Performance in Turkey
Evaluating of Milking Parlor Performance in Turkey
E. GONULOL, P. ULGER
Anahtar Kelimeler : Milking machine, milking parlor performance, dry test, milk flow rate, vacuum
Key Words : Milking machine, milking parlor performance, dry test, milk flow rate, vacuum

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Establishment of Winter Rape after Cereal by Combine Seeding
Establishment of Winter Rape after Cereal by Combine Seeding
G. LUNDIN
Anahtar Kelimeler : combine, harvesting, seeding, rape, straw, residue
Key Words : combine, harvesting, seeding, rape, straw, residue

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A Research on Evaluation of Soil Tillage Systems in Growing Canola in Trakya Region
A Research on Evaluation of Soil Tillage Systems in Growing Canola in Trakya Region
Y. BAYHAN, P. ÜLGER, C. SAĞLAM, E. GÖNÜLOL
Anahtar Kelimeler : Canola, Tillage, Growing, Economic analyze
Key Words : Canola, Tillage, Growing, Economic analyze

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Determination of effect of Pure Biodiesel (B100) Using on Fuel Injection System in Diesel Engine
Determination of effect of Pure Biodiesel (B100) Using on Fuel Injection System in Diesel Engine
E. KILIÇ, Y. BAYHA, S. ARIN
Anahtar Kelimeler : Biodiesel, engine, injection pump, injector, filter and wear
Key Words : Biodiesel, engine, injection pump, injector, filter and wear

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Determination of Effect of Pure Biodiesel (B100) on Some Components of Diesel Engine
Determination of Effect of Pure Biodiesel (B100) on Some Components of Diesel Engine
S. ARIN, Y. BAYHAN, E. KILIÇ
Anahtar Kelimeler : Biodiesel, engine, crankshaft, cylinder, piston, wear
Key Words : Biodiesel, engine, crankshaft, cylinder, piston, wear

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Determining Mechanization Conditions of Milk Enterprises in European Union Process
Determining Mechanization Conditions of Milk Enterprises in European Union Process
İ. İÇÖZ
Anahtar Kelimeler : Milk operation equipment, milk, dairy
Key Words : Milk operation equipment, milk, dairy

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Seed Distribution Uniformity of No-till Furrow Openers and Depth Control Units: A Comparative Study
Seed Distribution Uniformity of No-till Furrow Openers and Depth Control Units: A Comparative Study
D. KARAYEL, A. ÖZMERZİ
Anahtar Kelimeler : Seeder, No-till Sowing, Furrow Opener, Seed Distribution, Maize
Key Words : Seeder, No-till Sowing, Furrow Opener, Seed Distribution, Maize

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Short-Term Responses of Soil Physical Properties to Maize Tillage-Planting Systems in a Semiarid Mediterranean Environment in Western Turkey
Short-Term Responses of Soil Physical Properties to Maize Tillage-Planting Systems in a Semiarid Mediterranean Environment in Western Turkey
S. ÖZPINAR, A. AYDIN, M. IŞIKTEPE
Anahtar Kelimeler : Maize, tillage, soil physical properties, oxygen diffusion rate
Key Words : Maize, tillage, soil physical properties, oxygen diffusion rate

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Performance of Various Drift Control Additives
Performance of Various Drift Control Additives
G. MASIA, A. FUICA, L. VENTURELLI, G. G. ANTA
Anahtar Kelimeler : drift, spray additives, wind direction
Key Words : drift, spray additives, wind direction

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Braking Comportment Verification for Tractors and Agricultural Trailers
Braking Comportment Verification for Tractors and Agricultural Trailers
M. M. GABRIEL, B. SILVIU, D. BRAHARU, V. IULIAN
Anahtar Kelimeler : testing, tractor, trailer,brake, DATRON
Key Words : testing, tractor, trailer,brake, DATRON

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Contributions Regarding the Dynamic and Energetic Optimization of Tractor - Fodder Harvesting Machine System
Contributions Regarding the Dynamic and Energetic Optimization of Tractor - Fodder Harvesting Machine System
E. VOICU, S. POPESCU
Anahtar Kelimeler : Forage harvester, agricultural tractor, tractor- forage harvester system, , energetical model, power consumption
Key Words : Forage harvester, agricultural tractor, tractor- forage harvester system, , energetical model, power consumption

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Influence of Tooth Profile of Saw-Gin Blade on the Fiber Characteristics
Influence of Tooth Profile of Saw-Gin Blade on the Fiber Characteristics
N. SOOMRO, S. ÖZTEKİN
Anahtar Kelimeler : Cotton Ginning, Gin-Saw, Saw-Gin, Tooth Profile, Lint, GOT%, Presseley, Micronaire value (Mice)
Key Words : Cotton Ginning, Gin-Saw, Saw-Gin, Tooth Profile, Lint, GOT%, Presseley, Micronaire value (Mice)

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Current Situation of Mechanization in Cotton Harvesting in Southeastern Anatolia Project (Seap) Areas in Turkey
Current Situation of Mechanization in Cotton Harvesting in Southeastern Anatolia Project (Seap) Areas in Turkey
R. POLAT, H. Şahin, B. Pişkin, C. SAĞLAM
Anahtar Kelimeler : Cotton harvesting mechanization
Key Words : Cotton harvesting mechanization

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Investigation of Temperature and Humidity VariationsWithin a Commercial Vegetables Greenhouse in IRAN
Investigation of Temperature and Humidity VariationsWithin a Commercial Vegetables Greenhouse in IRAN
D. MOMENI
Anahtar Kelimeler : Greenhouse, Temperature, Humidity
Key Words : Greenhouse, Temperature, Humidity

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Technology and Production of Eggs in Alternative Housing of Layers
Technology and Production of Eggs in Alternative Housing of Layers
P. KIC
Anahtar Kelimeler : Layers, floor housing, eggs, temperature, humidity, light, noise, feed consumption
Key Words : Layers, floor housing, eggs, temperature, humidity, light, noise, feed consumption

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Energy Consumption Trend in Iran Agricultural Sector and Its Effect on Air Pollutants Emission
The Energy Consumption Trend in Iran Agricultural Sector and Its Effect on Air Pollutants Emission
A. MARZBAN, M. ALMASSI, H. BAHRAMI, M. H. RAZZAGHI
Anahtar Kelimeler : Energy, Agriculture, Productivity, Air pollutants
Key Words : Energy, Agriculture, Productivity, Air pollutants

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Energy Ratio in Dryland Wheat - Case Study: Eghlid Township
Energy Ratio in Dryland Wheat - Case Study: Eghlid Township
K. MOLLAEE, A. KEYHANI, M. KARIMI, K. KHAIRALIPOUR, M. G. VARNAMKHASTI
Anahtar Kelimeler : Energy ratio, Fuel consumption, Fertilizer, Net energy gain
Key Words : Energy ratio, Fuel consumption, Fertilizer, Net energy gain

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Optimum Energy Inputs in Wheat Production System: Data Envelopment Analysis (DEA) Approach
Optimum Energy Inputs in Wheat Production System: Data Envelopment Analysis (DEA) Approach
S. M. NASSIRI, S. SINGH
Anahtar Kelimeler : Data envelopment analysis, Energy, Optimization, Wheat
Key Words : Data envelopment analysis, Energy, Optimization, Wheat

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Renewable Energy Based Technology for Small Processing Unit
Renewable Energy Based Technology for Small Processing Unit
K. ABDULLAH
Anahtar Kelimeler : E31 village, SPU, renewable energy, energy self sufficient village, agricultural and marine products
Key Words : E31 village, SPU, renewable energy, energy self sufficient village, agricultural and marine products

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

An Input-Output Energy Analysis for A Mechanized Poultry House in Babol Region
An Input-Output Energy Analysis for A Mechanized Poultry House in Babol Region
S. NAJAFI, N. KHADEMOLHOSSEINI, M. BAGHAE, J. KHOSRAVI, A. MOHAMADI
Anahtar Kelimeler : energy analysis, energy efficiency, utilized energy, poultry house
Key Words : energy analysis, energy efficiency, utilized energy, poultry house

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Field Bioenergy in Finland, Possibilities and Challenges
Field Bioenergy in Finland, Possibilities and Challenges
J. AHOKAS, H. MIKKOLA
Anahtar Kelimeler : Bioenergy, energy analysis, GHG analysis
Key Words : Bioenergy, energy analysis, GHG analysis

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Development Strategy of Electricity Production from Biomass
Development Strategy of Electricity Production from Biomass
P. F. BOROWSKI
Anahtar Kelimeler : Management, elecrticity production, biomass
Key Words : Management, elecrticity production, biomass

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Optimization of Biodiesel Production from Cottonseed Oil by Transesterification Using NaOH and Methanol
Optimization of Biodiesel Production from Cottonseed Oil by Transesterification Using NaOH and Methanol
N. HODA, L. BUDAMA
Anahtar Kelimeler : biodiesel, transesterification, cottonseed oil, renewable energy, methanolysis
Key Words : biodiesel, transesterification, cottonseed oil, renewable energy, methanolysis

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

An Energy Analysis in Greenhouse Tomato Production in Bulgaria
An Energy Analysis in Greenhouse Tomato Production in Bulgaria
M. MIHOV, T. MITOVA, S. MASHEVA, V. YANKOVA
Anahtar Kelimeler : Tomato production, greenhouses, diesel oil, machinery, plant protection products, solarization, fertilizers, bioproducts, energy consumption, energy equivalent, energy ratio
Key Words : Tomato production, greenhouses, diesel oil, machinery, plant protection products, solarization, fertilizers, bioproducts, energy consumption, energy equivalent, energy ratio

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Neural Modelling of Ammonia Emissions
Neural Modelling of Ammonia Emissions
P. NIZEWSKI, J. DACH, P. BONIECKI
Anahtar Kelimeler : neural networks, composting process, ammonia emissions, sewage sludge
Key Words : neural networks, composting process, ammonia emissions, sewage sludge

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Energy Production in Iran’s Agronomy
Energy Production in Iran’s Agronomy
I. B. TABAR, M. KARIMI, J. KHOSRAVI, G. M. KHUBBAKHT
Anahtar Kelimeler : Output energy, energy per capita, Iran agricultural
Key Words : Output energy, energy per capita, Iran agricultural

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Investigation of Factors Affecting on Energy Consumption in Iran Agriculture Sector
Investigation of Factors Affecting on Energy Consumption in Iran Agriculture Sector
M. H. RAZZAGHII, N. M. ABYAR
Anahtar Kelimeler : Iran, Agriculture, energy consumption, GDP, employment
Key Words : Iran, Agriculture, energy consumption, GDP, employment

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Biomass from Energy Source to Strategic Energy Resource
Biomass from Energy Source to Strategic Energy Resource
E. POPA, A. MUSCALU, M. NEDELCU
Anahtar Kelimeler : renewable sources, ecologic, fuel
Key Words : renewable sources, ecologic, fuel

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Moiré Assisted Uniaxial Traction and Compression Tests on Bundle Log Models
Moiré Assisted Uniaxial Traction and Compression Tests on Bundle Log Models
J. GAZZOLA, I. M. D. FABBRO, C. C. ALMEIDA
Anahtar Kelimeler : Moiré methods, mechanical behavior of log bundles, log transportation
Key Words : Moiré methods, mechanical behavior of log bundles, log transportation

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Development Strategies of Biofuels in Turkey
Development Strategies of Biofuels in Turkey
H. ÖĞÜT, H. O. MENGEŞ, M. BABAOĞLU, H. OĞUZ, B. SADE, T. ERYILMAZ
Anahtar Kelimeler : Biodiesel policy, national strategy, biofuel
Key Words : Biodiesel policy, national strategy, biofuel

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Energy Loss in Different Conservation Methods of Poplar Chips
Energy Loss in Different Conservation Methods of Poplar Chips
M. FEDRIZZI, F. GALLUCCI, A. CIRIELLO
Anahtar Kelimeler : SRF storage, chip, energy content, heating value preservation
Key Words : SRF storage, chip, energy content, heating value preservation

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Estimation of the Effects of Operational Parameters of Continuous Base Aeration for Composting Process Using Computer Model
Estimation of the Effects of Operational Parameters of Continuous Base Aeration for Composting Process Using Computer Model
K. EKİNCİ, R. KÜLCÜ, H. M. KEENER
Anahtar Kelimeler : Composting, Continuous Base Aeration, Operational Parameters
Key Words : Composting, Continuous Base Aeration, Operational Parameters

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effects of Aeration Interval in Intermittent Base Aeration Used in Composting Process
Effects of Aeration Interval in Intermittent Base Aeration Used in Composting Process
R. KULCU, O. YALDIZ
Anahtar Kelimeler : Composting, intermittent aeration, decomposition
Key Words : Composting, intermittent aeration, decomposition

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Emission of GHG from livestock production in the Mediterranean Region of Turkey
Emission of GHG from livestock production in the Mediterranean Region of Turkey
R. KÜLCÜ, K. EKİNCİ, C. ERTEKİN
Anahtar Kelimeler : Greenhouse gas, Mediterranean region, Livestock production
Key Words : Greenhouse gas, Mediterranean region, Livestock production

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Evaluation of Auxiliary Energy Efficiency on Silage Corn in Secondary Cropping After Winter Wheat in Khoy Region (West Azerbijan, Iran)
Evaluation of Auxiliary Energy Efficiency on Silage Corn in Secondary Cropping After Winter Wheat in Khoy Region (West Azerbijan, Iran)
J. K. MAHALEH, M. R. Navvab, N. AKHONDI, H. H. ASL
Anahtar Kelimeler : Energy efficiency, Input, Output, silage corn
Key Words : Energy efficiency, Input, Output, silage corn

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of the Vertical Wind Profile upon the Operation of Wind-Power Plant
Effect of the Vertical Wind Profile upon the Operation of Wind-Power Plant
I. PATAY, L. TÓTH, N. SCHREMPF
Anahtar Kelimeler : Wind-Power Plant, Wind Profile, Wind measuring
Key Words : Wind-Power Plant, Wind Profile, Wind measuring

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Agricultural Biomass Potential in Hungary
Agricultural Biomass Potential in Hungary
J. HAJDÚ, L. MAGÓ
Anahtar Kelimeler : renewable energy, biomass, bio-ethanol, bio-diesel, biomass potential
Key Words : renewable energy, biomass, bio-ethanol, bio-diesel, biomass potential

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Energy Flow and Economic Analysis of Kiwifruit Production in Iran
Energy Flow and Economic Analysis of Kiwifruit Production in Iran
A. Mohammai, S. Rafiee, R. Abbaszade, H. Rafiee
Anahtar Kelimeler : Energy input, kiwifruit, labour cost, Iran
Key Words : Energy input, kiwifruit, labour cost, Iran

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Energy Balance Sheet Assessment in Meal Mushroom (Agaricus Bisporus) and its Optimization Methods
Energy Balance Sheet Assessment in Meal Mushroom (Agaricus Bisporus) and its Optimization Methods
M. RASAEIFAR, A. M. AGHDAM, M. R. ZARDOSHTI, V. MUSANEJHAD, J. K. MAHALEH, A. H. Z. G. TAPEH
Anahtar Kelimeler : Agaricus bisporus, Energy, output and input, Energy efficiency
Key Words : Agaricus bisporus, Energy, output and input, Energy efficiency

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Formation Curve of the Rivers Discharge Using MIKE 11
Formation Curve of the Rivers Discharge Using MIKE 11
O. ANTIPOVA
Anahtar Kelimeler : river discharge, curve formation, hydrodynamic model, modelling system MIKE 11
Key Words : river discharge, curve formation, hydrodynamic model, modelling system MIKE 11

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Modeling Of the Cost of Water Pumped by Wind Power System in the Area of Gabès, Tunisia
Modeling Of the Cost of Water Pumped by Wind Power System in the Area of Gabès, Tunisia
M. GHZAIEL, M. R. JEDAY, M. MNIFI
Anahtar Kelimeler : wind power, pumping, modeling
Key Words : wind power, pumping, modeling

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Water Quality of Irrigation Sources in Coastal Part of Albania
Water Quality of Irrigation Sources in Coastal Part of Albania
U. ABAZI, S. SHAHINI, H. MANKOLLI
Anahtar Kelimeler : pH, EC, SAR, irrigation water, water quality
Key Words : pH, EC, SAR, irrigation water, water quality

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Hourly Ratio of the Solar To the Extraterrestrial Radiation and Its 2 1 Effect to Daily Solar Radiation
The Hourly Ratio of the Solar To the Extraterrestrial Radiation and Its 2 1 Effect to Daily Solar Radiation
V. AMBAS, E. BALTAS
Anahtar Kelimeler : Weirghting factors, Adjusted sunshine duration, solar radiation, Angstrom equation
Key Words : Weirghting factors, Adjusted sunshine duration, solar radiation, Angstrom equation

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

In Farm Production and Use of Vegetable Oils
In Farm Production and Use of Vegetable Oils
T.A. GEMTOS, P. KALAVRIOTOU, C. KAVALARIS, C. KARAMOUTIS, S. FOUNTAS
Anahtar Kelimeler : sunflower, oil extraction, in farm use, energy sufficient farm
Key Words : sunflower, oil extraction, in farm use, energy sufficient farm

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Hydropower Plants Influence on Downstream River’s Water Quality
Hydropower Plants Influence on Downstream River’s Water Quality
A. VAIDELIENE
Anahtar Kelimeler : Hydropower plant, water level, dam, downstream, river
Key Words : Hydropower plant, water level, dam, downstream, river

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Operating Conditions and the Unglazed Transpired Solar Air Heaters (UTSAH) Performance
Operating Conditions and the Unglazed Transpired Solar Air Heaters (UTSAH) Performance
A. A. HASSANAIN
Anahtar Kelimeler : Operating conditions for UTSAH, heat loss techniques, Wind speed, performance
Key Words : Operating conditions for UTSAH, heat loss techniques, Wind speed, performance

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A Feasibility Study for the Production of Bioethanol in Türkiye
A Feasibility Study for the Production of Bioethanol in Türkiye
E. İÇÖZ, K. M. TUĞRUL
Anahtar Kelimeler : Sugar beet, wheat and ethanol
Key Words : Sugar beet, wheat and ethanol

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Virtual Education on Agriculture and Practicability in Turkey
Virtual Education on Agriculture and Practicability in Turkey
Y. DİLAY, M.U. YILDIZ, A. ÖZKAN
Anahtar Kelimeler : Virtual Education, Agricultural, Turkey
Key Words : Virtual Education, Agricultural, Turkey

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Investigation of Technologies for Precision Agriculture and Estimation of their Efficiency
Investigation of Technologies for Precision Agriculture and Estimation of their Efficiency
A. Vilde, D. Lapins, G. Dinaburga, A. Rucins, S. Cesnieks, A. Berzins, A. Plume, J. Repsons
Anahtar Kelimeler : yield maps, soil properties variability, resources saving
Key Words : yield maps, soil properties variability, resources saving

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Review of Sensor Studies for Environment-Friendly Input Application for Golf Courses
Review of Sensor Studies for Environment-Friendly Input Application for Golf Courses
M. KESKİN
Anahtar Kelimeler : Golf course, turfgrass, sensor, environment, irrigation, fertilizer, pesticides
Key Words : Golf course, turfgrass, sensor, environment, irrigation, fertilizer, pesticides

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Measurement and Applications of Soil Electrical Conductivity in Precision Agriculture
Measurement and Applications of Soil Electrical Conductivity in Precision Agriculture
S. G. KESKİN
Anahtar Kelimeler : electrical conductivity, precision farming, variability, mapping
Key Words : electrical conductivity, precision farming, variability, mapping

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

CRA-W’s Committee of Intervention: Analyse of Catchments Polluted with Pesticide
CRA-W’s Committee of Intervention: Analyse of Catchments Polluted with Pesticide
S. NOEL, B. B. BAH, G. COLLINET, A. SOREL, D. BUFFET, V. HALLET, B. HUYGHEBAERT
Anahtar Kelimeler : pesticide, catchment, Committee of intervention
Key Words : pesticide, catchment, Committee of intervention

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Mapping Sugar Beet Density Using Remote Sensing
Mapping Sugar Beet Density Using Remote Sensing
K. MOLLAEE, H. AHMADI, A. RAJABIPOUR, S. K. ALAVIPANA
Anahtar Kelimeler : Remote sensing, Satellite images, Plant density, Sugar beet, IRS-P6
Key Words : Remote sensing, Satellite images, Plant density, Sugar beet, IRS-P6

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Mapping Sugar Beet Biomass with Multispectral Satellite Imagery
Mapping Sugar Beet Biomass with Multispectral Satellite Imagery
K. MOLLAEE, H. AHMADI, S.K. ALAVIPANA 614 1 , A. RAJABIPOUR
Anahtar Kelimeler : Remote sensing, Satellite images, Biomass, Sugar beet, NDVI index, IRS-P6
Key Words : Remote sensing, Satellite images, Biomass, Sugar beet, NDVI index, IRS-P6

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A Research on Distinguishing Sunflower, Weed and Soil Images using LVQ Artificial Neural Networks
A Research on Distinguishing Sunflower, Weed and Soil Images using LVQ Artificial Neural Networks
F. G. PEKİTKAN, İ. KAVDIR
Anahtar Kelimeler : LVQ artificial neural networks, image recognition, weed recognition
Key Words : LVQ artificial neural networks, image recognition, weed recognition

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Effects of Weather on Saffron Yield in Iran
The Effects of Weather on Saffron Yield in Iran
S. H. SANAEINEJAD, S. N. HOSSEINI, S. M. HASHEMINIA, M. FARSI
Anahtar Kelimeler : saffron, crop-weather model, yield
Key Words : saffron, crop-weather model, yield

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Site-Specific Weed Control: Dynamic Performance And Weed Mapping Of A Weed Detector System Designed By Researchers Of INTA
Site-Specific Weed Control: Dynamic Performance And Weed Mapping Of A Weed Detector System Designed By Researchers Of INTA
A. MOLTONI, G. MASIÁ, S. DURO, R. CID, L. MOLTONI, M. CASARTELLI, J. HILBERT, A. FUICA
Anahtar Kelimeler : herbicide application, spot spraying, weed detection
Key Words : herbicide application, spot spraying, weed detection

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Controller Area Network (CAN) in Agricultural Machines
Controller Area Network (CAN) in Agricultural Machines
M. A. DAYIOĞLU
Anahtar Kelimeler : CAN, CAN bus, network, ISO 11783, ISOBUS
Key Words : CAN, CAN bus, network, ISO 11783, ISOBUS

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

An Automation Application for Apple Gardens in Karaman
An Automation Application for Apple Gardens in Karaman
Y. DİLAY, A. ÖZKAN, H. SOY
Anahtar Kelimeler : Apple Garden, Automation, Karaman, Turkey
Key Words : Apple Garden, Automation, Karaman, Turkey

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Image Processing Techniques for Chlorophyll Content Estimation Of Walnut Variety Leaves
Image Processing Techniques for Chlorophyll Content Estimation Of Walnut Variety Leaves
M. MAHMOODI, N. MOHAMADI, J. KHAZAEI, Z. JAVANMARDI
Anahtar Kelimeler : Chlorophyll,Image processing, Chemical method, SPAD method
Key Words : Chlorophyll,Image processing, Chemical method, SPAD method

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Intelligent Control Based Fuzzy Logic for Automation of Greenhouse Irrigation System and Evaluation in Relation to Conventional Systems
Intelligent Control Based Fuzzy Logic for Automation of Greenhouse Irrigation System and Evaluation in Relation to Conventional Systems
P. J. KIA, A. T. FAR, M. OMID, R. ALIMARDANI, L. NADERLOO
Anahtar Kelimeler : Control, Fuzzy, Automation, Greenhouse, Irrigation system
Key Words : Control, Fuzzy, Automation, Greenhouse, Irrigation system

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Analysis of Tractor Related Injuries Among Tractor Operators in Kwara State, Nigeria
Analysis of Tractor Related Injuries Among Tractor Operators in Kwara State, Nigeria
I. OGUNLADE, M. ABDULKAREEM
Anahtar Kelimeler : tractors, tractor related injuries, socio economic characteristics safety features, participation unsafely training
Key Words : tractors, tractor related injuries, socio economic characteristics safety features, participation unsafely training

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Condition Monitoring (CM) By Oil Analyzing In Agricultural Machinery
Condition Monitoring (CM) By Oil Analyzing In Agricultural Machinery
M.REZAEI1, M.JAHANGIRI 2, H.GOLI 3, M. DOWLATI 4, M. KAZAZI 5
Anahtar Kelimeler : PQ measurement test, flash point test, Hot plate test, tractor, particle quainter analysis
Key Words : PQ measurement test, flash point test, Hot plate test, tractor, particle quainter analysis

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Analysis of Soil Crust in Cotton Farming in Terms of Agriculture Machinery Management
Analysis of Soil Crust in Cotton Farming in Terms of Agriculture Machinery Management
İ.YALÇIN, C.ÖZARSLAN, N.APAYDIN
Anahtar Kelimeler : Cotton, soil crust, agriculture machinery management
Key Words : Cotton, soil crust, agriculture machinery management

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Farming Systems Research / Development An Appropriate Approach for Agricultural Mechanization Development
Farming Systems Research / Development An Appropriate Approach for Agricultural Mechanization Development
M. DOWLATI1 , R. NIKDOKHT2
Anahtar Kelimeler : Agricultural development, FSR/D, Mechanization, Poor farmers, R&D
Key Words : Agricultural development, FSR/D, Mechanization, Poor farmers, R&D

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effective Delivery System of Farm Machinery Technology for Mechanization Development in Mountains
Effective Delivery System of Farm Machinery Technology for Mechanization Development in Mountains
S.SINGH
Anahtar Kelimeler : Mountain, farm, mechanization and service centre
Key Words : Mountain, farm, mechanization and service centre

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Estimation of Timeliness as an Important Parameter for Mechanized Cultivation Operations in Hamedan, Western Iran
Estimation of Timeliness as an Important Parameter for Mechanized Cultivation Operations in Hamedan, Western Iran
M.B. LAK, M.S. BOLUKI
Anahtar Kelimeler : Agricultural mechanization parameters, Hamedan, timeliness, efficient ratio, infiltration velocity, critical period.
Key Words : Agricultural mechanization parameters, Hamedan, timeliness, efficient ratio, infiltration velocity, critical period.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Native Agricultural Mechanized Services Companies on National Mechanization Development
Effect of Native Agricultural Mechanized Services Companies on National Mechanization Development
M. BAYATI, M. GHORBANI, N.SHAHNOUSHI
Anahtar Kelimeler : agrcultural mechnization,agricultural mechanized society,agricultural mechanized services companies.
Key Words : agrcultural mechnization,agricultural mechanized society,agricultural mechanized services companies.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Mechanization Properties of Siirt Cultivar Pistachio
Mechanization Properties of Siirt Cultivar Pistachio
A. SESSİZ, M.M. TURGUT, F.G. PEKİTKAN
Anahtar Kelimeler : Agricultural Structure, Mechanization Properties, Pistachio, Siirt
Key Words : Agricultural Structure, Mechanization Properties, Pistachio, Siirt

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Traceability Systems in the Olive Growing Production Chain for Quality and Food Safety
Traceability Systems in the Olive Growing Production Chain for Quality and Food Safety
L. M. ABENAVOLI, G.SCIARRONE
Anahtar Kelimeler : Traceability, food safety, production chain, olive oil
Key Words : Traceability, food safety, production chain, olive oil

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Farm Management And It’s Wide Benefits In Drylands In Syria
The Farm Management And It’s Wide Benefits In Drylands In Syria
HADDAD G., UGRÓSDY G.
Anahtar Kelimeler : Research evaluation; Whole-farm modelling; Syria
Key Words : Research evaluation; Whole-farm modelling; Syria

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Consequences of Tractor Accidents in the Agriculture in Republic of Macedonia
Consequences of Tractor Accidents in the Agriculture in Republic of Macedonia
Z. DIMITROVSKI
Anahtar Kelimeler : agriculture, tractor, accidents, causes of accidents, consequences of accidents, fatal injuries
Key Words : agriculture, tractor, accidents, causes of accidents, consequences of accidents, fatal injuries

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Synthesis of the Handpallets Mechanism
Synthesis of the Handpallets Mechanism
V. MOISE, G. VOICU, G. PARASCHIV, E. MAICAN
Anahtar Kelimeler : synthesis, handpallets, point guiding, plane guiding
Key Words : synthesis, handpallets, point guiding, plane guiding

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Machinery Usage Models in Greenhouse Farms of Antalya Province in Turkey
Machinery Usage Models in Greenhouse Farms of Antalya Province in Turkey
M. ÇANAKCI, İ. AKINCI
Anahtar Kelimeler : Machinery usage models, multifarm use of machinery, greenhouse cultivation, Antalya
Key Words : Machinery usage models, multifarm use of machinery, greenhouse cultivation, Antalya

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Physical and Mechanical Properties of Beans
Physical and Mechanical Properties of Beans
A. ESEHAGHBEYGI , B. HOSEINZADEH, N. RAGHAMI
Anahtar Kelimeler : Bean, friction, Dynamic, Impact, physical attributes
Key Words : Bean, friction, Dynamic, Impact, physical attributes

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Determination of the Breakage Susceptibility of Rice Grains by Impact Loading
Determination of the Breakage Susceptibility of Rice Grains by Impact Loading
M. DAEIJAVAD, A. ESEHAGHBEYGI, A. H. AFKARI SAYYAH
Anahtar Kelimeler : Rice, Drying, Impact, Breakage susceptibility, Stress Cracking Index
Key Words : Rice, Drying, Impact, Breakage susceptibility, Stress Cracking Index

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Modeling the Mass of Oranges by Geometrical Properties
Modeling the Mass of Oranges by Geometrical Properties
K. K. VURSAVUŞ, F. ÖZGÜVEN
Anahtar Kelimeler : orange, geometrical properties, volume of fruit, mass, modeling
Key Words : orange, geometrical properties, volume of fruit, mass, modeling

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Estimation of Barley Layers Moisture Content Using Artificial Neural Networks During Drying process
Estimation of Barley Layers Moisture Content Using Artificial Neural Networks During Drying process
R. AMIRI CHAYJAN, H.H.A. ALIZADE
Anahtar Kelimeler : Barely, Levenberg-Marquardt algorithm, Feed forward network, Cascade forward network
Key Words : Barely, Levenberg-Marquardt algorithm, Feed forward network, Cascade forward network

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Application of an Artificial Neural Network Model for Estimation of Head Rice Yield in Fluidized Bed Drying
Application of an Artificial Neural Network Model for Estimation of Head Rice Yield in Fluidized Bed Drying
R. AMIRI CHAYJAN, M. H. KHOSHTAGHAZA
Anahtar Kelimeler : Back Propagation Network, Head Rice Yield, Levenberg-Marquardt, Rough Rice
Key Words : Back Propagation Network, Head Rice Yield, Levenberg-Marquardt, Rough Rice

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Mixed Mode Thin Layer Solar Drying Models for Cuminum Cyminum
Mixed Mode Thin Layer Solar Drying Models for Cuminum Cyminum
M. MORADI, A. ZOMORODIAN, D. ZARE
Anahtar Kelimeler : Thin layer drying model, mathematical model, Cuminum Cyminum.
Key Words : Thin layer drying model, mathematical model, Cuminum Cyminum.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Drying Process on Cleaning Efficiency and Quality of the Mechanically Harvested Seed Cotton
Effect of Drying Process on Cleaning Efficiency and Quality of the Mechanically Harvested Seed Cotton
EL-SAYED G.H.; M.M. EL-KHOLY, A. EL- SHAZLY
Anahtar Kelimeler : ,
Key Words : ,

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Composition of Maize-Buckwheat Mixture on Mechanical Strength of Extrudate
Effect of Composition of Maize-Buckwheat Mixture on Mechanical Strength of Extrudate
A. EKIELSKI, Z. MAJEWSKI, T. ŻELAZIŃSKI
Anahtar Kelimeler : extrusion. buckwheat, mechanical strength
Key Words : extrusion. buckwheat, mechanical strength

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effects of Moisture Content on the Physical and Frictional Properties of Lablab
Effects of Moisture Content on the Physical and Frictional Properties of Lablab
K. J. SIMONYAN, Y. D. YILJEP, O.B. OYATOYAN, G.S. BAWA
Anahtar Kelimeler : Physical properties, frictional properties, lablab, moisture content, seed.
Key Words : Physical properties, frictional properties, lablab, moisture content, seed.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Modern and Conventional Rice Milling Systems on Rice Waste in Guilan Province
Effect of Modern and Conventional Rice Milling Systems on Rice Waste in Guilan Province
J.KHOSRAVI, M.A. ASOODAR, I. BEHESHTI TABAR, S.NAJAFI
Anahtar Kelimeler : Rice, rice milling, percentage of grain broken, whiteness degree, waste
Key Words : Rice, rice milling, percentage of grain broken, whiteness degree, waste

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Development and Application of Rotary Potato Grader Part I - Design and Construction
The Development and Application of Rotary Potato Grader Part I - Design and Construction
N. SAKENIAN DEHKORDI, R. FARHADI, S. BESHARATI
Anahtar Kelimeler : gradation, potato, precision, rotary helix, mass range.
Key Words : gradation, potato, precision, rotary helix, mass range.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Development and Application of Rotary Potato Grader Part II- Machine Optimization
The Development and Application of Rotary Potato Grader Part II- Machine Optimization
N. SAKENIAN DEHKORDI, R. FARHADI, S. BESHARATI
Anahtar Kelimeler : Optimization, gradation precision, rotational speed, feed, response surface statistical model.
Key Words : Optimization, gradation precision, rotational speed, feed, response surface statistical model.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Machine Vision System for Shape and Color-Based Quality Ranking of Saffron Peach Using Image Processing
Machine Vision System for Shape and Color-Based Quality Ranking of Saffron Peach Using Image Processing
M. ARDFOROUSHAN, A. ESEHAGHBEYGI
Anahtar Kelimeler : Saffron Peach, machine vision, image processing
Key Words : Saffron Peach, machine vision, image processing

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Physical Properties of Three Potato Varieties during Storage Period
Physical Properties of Three Potato Varieties during Storage Period
A. GOLMOHAMMADI, A. ASGHARI, G. PURRAHIMI
Anahtar Kelimeler : design parameters, physical properties, post harvest, potato.
Key Words : design parameters, physical properties, post harvest, potato.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Energy Optimization of Rough Rice Drying Using Simulation Model
Energy Optimization of Rough Rice Drying Using Simulation Model
D. ZARE
Anahtar Kelimeler : Rough rice drying, simulation model, deep-bed batch dryer, energy optimization.
Key Words : Rough rice drying, simulation model, deep-bed batch dryer, energy optimization.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Some Physical Properties of Jojoba Fruit Related with Design of Processing Equipments
Some Physical Properties of Jojoba Fruit Related with Design of Processing Equipments
A. İNCE, S. UĞURLUAY, Ö. B. ÖZLÜOYMAK, E. GÜZEL, M. T. ÖZCAN
Anahtar Kelimeler : Physical properties, jojoba, compression loading
Key Words : Physical properties, jojoba, compression loading

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Design of a Walnut Cracking Machine Based on Acquired Mechanical Properties
Design of a Walnut Cracking Machine Based on Acquired Mechanical Properties
F. SHARIFIAN, A. RAHMANI DIDAR, M. HADDAD DERAFSHI
Anahtar Kelimeler : Walnut, mecihanical properties, design, cracking machine
Key Words : Walnut, mecihanical properties, design, cracking machine

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Modeling Of Terminal Velocity of Apple in Water
Modeling Of Terminal Velocity of Apple in Water
K. KHEIRALIPOUR, A. TABATABAEEFAR, H. MOBLI, S. RAFIEE, A. JAFARI, A. RAJABIPOUR
Anahtar Kelimeler : Terminal velocity; Redspar apple; Sorting.
Key Words : Terminal velocity; Redspar apple; Sorting.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Moiré Supported Fruit Sorting Process
Moiré Supported Fruit Sorting Process
D.S. PELLEGRINA, I. Maria Dal FABBRO, A.C.L. LINO
Anahtar Kelimeler : fruit sorting, moiré technique, three dimension image generation.
Key Words : fruit sorting, moiré technique, three dimension image generation.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Design and Development of a Heat Pump Rough Rice Dryer: A Study of Energy and Quality
Design and Development of a Heat Pump Rough Rice Dryer: A Study of Energy and Quality
M. TORKİ, M. SADEGHİ, M. DAVAZDAH EMAMİ, A. MOHEB
Anahtar Kelimeler : Heat pump, deep bed, mathematical modeling, energy, rough rice drying
Key Words : Heat pump, deep bed, mathematical modeling, energy, rough rice drying

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Measuring moisture diffusivity and activation energy of kiwifruit (cv. Hayward) during convective hot air drying
Measuring moisture diffusivity and activation energy of kiwifruit (cv. Hayward) during convective hot air drying
Ali MOHAMMADI, Shahin RAFIEEA, Alireza KEYHANI, Zahra Emam-DJOMEH, Ali JAFARY
Anahtar Kelimeler : Kiwifruit, Moisture diffusivity, Activation energy, Fick’s diffusion model.
Key Words : Kiwifruit, Moisture diffusivity, Activation energy, Fick’s diffusion model.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Mathematical Modeling of Drying Characteristics of Kiwifruit Slice (Cv. Hayward)
Mathematical Modeling of Drying Characteristics of Kiwifruit Slice (Cv. Hayward)
A.MOHAMMADI, S. RAFIEEA, A. KEYHANI, Z. E.-DJOMEH
Anahtar Kelimeler : Drying, Kiwifruit, Modeling, Moisture ratio.
Key Words : Drying, Kiwifruit, Modeling, Moisture ratio.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Mechanical Properties of Eucalyptus Grandis Assisted By a Moiré Technique
Mechanical Properties of Eucalyptus Grandis Assisted By a Moiré Technique
J. GAZZOLA, I. Maria DAL FABBRO, S. RODRIGUES
Anahtar Kelimeler : Moiré, Eucalyptus, Mechanical properties.
Key Words : Moiré, Eucalyptus, Mechanical properties.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effects of Two Rice Miller Types on Milling Characteristics of Three Varieties at Different Moisture Contents
Effects of Two Rice Miller Types on Milling Characteristics of Three Varieties at Different Moisture Contents
S. H. HOSEINIAN, M. SADEGHI, A. HEMMAT, M. HEIDARI SOLTANABADI, F. TAVASSOLI LARIJANI
Anahtar Kelimeler : Rice milling, Head rice yield, degree of milling, moisture content, variety
Key Words : Rice milling, Head rice yield, degree of milling, moisture content, variety

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Moiré Aided Fruit Bruise Detection
Moiré Aided Fruit Bruise Detection
C. De ALMEIDA, I. Maria DAL FABBRO, D.K. LUDUVICO A. C. Loureiro LINO
Anahtar Kelimeler : Moiré methods, fruit selection and sorting, bruise detection
Key Words : Moiré methods, fruit selection and sorting, bruise detection

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Moiré Aided Flexural and Torsional Loading Analysis of Log Bundle Models.
Moiré Aided Flexural and Torsional Loading Analysis of Log Bundle Models.
J. GAZZOLA, I. Maria DAL FABBRO, C. C. de ALMEIDA
Anahtar Kelimeler : Eucalyptus, log bundle mechanical properties, log transport.
Key Words : Eucalyptus, log bundle mechanical properties, log transport.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Vıscoelastıc Propertıes of Compacted Sugarcane (Saccharum officinarum L.) Bagasse.
Vıscoelastıc Propertıes of Compacted Sugarcane (Saccharum officinarum L.) Bagasse.
C. De ALMEIDA, I. Maria DAL FABBRO, E. DI RAIMO
Anahtar Kelimeler : Linear viscoelasticity, mechanical behavior, vegetative materials, time dependent Poisson’s ratio, sugarcane bagasse compaction..
Key Words : Linear viscoelasticity, mechanical behavior, vegetative materials, time dependent Poisson’s ratio, sugarcane bagasse compaction.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Influence of the Constructive and Function Parameters of the Gravimetric Vibration Dosing Systems for Agro-Foods Bulk Solids
The Influence of the Constructive and Function Parameters of the Gravimetric Vibration Dosing Systems for Agro-Foods Bulk Solids
S. POPESCU, D.C. OLA, V. POPESCU
Anahtar Kelimeler : bulk solids, dosing system, vibrating feeder, gravimetric dosing, dosing precision, experimental stand.
Key Words : bulk solids, dosing system, vibrating feeder, gravimetric dosing, dosing precision, experimental stand.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Determination of the Drying Behavior of a Fig Dried in a Solar Dryer with Natural Convection
Determination of the Drying Behavior of a Fig Dried in a Solar Dryer with Natural Convection
N. APAYDIN, M.B. COŞKUN
Anahtar Kelimeler : Solar Energy, Dryers, Drying.
Key Words : Solar Energy, Dryers, Drying.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Deformation Behavior Simulation of a Sample Apple under the Impact Effect with Finite Elements Method
Deformation Behavior Simulation of a Sample Apple under the Impact Effect with Finite Elements Method
H.K. ÇELİK, Ö. KABAŞ, M. TOPAKCI, A. ÖZMERZİ, İ. AKINCI
Anahtar Kelimeler : Mechanical properties, Golden delicious apple, Finite elements methods, Biological material
Key Words : Mechanical properties, Golden delicious apple, Finite elements methods, Biological material

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Some Physical Properties of Sesame Seed of Muganli-57 Cultivar
Some Physical Properties of Sesame Seed of Muganli-57 Cultivar
D. YILMAZ, C. ERTEKİN, I. AKINCI, M.İ. ÇAĞIRGAN
Anahtar Kelimeler : Sesame, Physical Properties,
Key Words : Sesame, Physical Properties,

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Storage Time on Quality of Plum Osmotically Pretreated with Trehalose and Sucrose Solutions Before Drying
Effect of Storage Time on Quality of Plum Osmotically Pretreated with Trehalose and Sucrose Solutions Before Drying
T. AKTAŞ, P. ÜLGER, F. DAĞLIOĞLU, F. HASTÜRK
Anahtar Kelimeler : Plum, hot air drying, storage, sugar treatment, quality
Key Words : Plum, hot air drying, storage, sugar treatment, quality

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Development of Multi-Product Sorting System for Grading Citrus Based on Color and Size
Development of Multi-Product Sorting System for Grading Citrus Based on Color and Size
M. KHOJASTEHNAZHAND, M. OMID, A. TABATABAEEFAR
Anahtar Kelimeler : Citrus; Multi-Product Sorting; Grading; Machine Vision; Volume; HSI Color; Image Processing
Key Words : Citrus; Multi-Product Sorting; Grading; Machine Vision; Volume; HSI Color; Image Processing

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Novel Non-thermal Technologies in Food Processing
Novel Non-thermal Technologies in Food Processing
A. DEMİRDÖVEN, H. YILDIZ, F. İÇİER, T. BAYSAL
Anahtar Kelimeler : Non-thermal technology; fundamental characteristics; energy effectiveness; food processing.
Key Words : Non-thermal technology; fundamental characteristics; energy effectiveness; food processing.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Physical and Mechanical Properties of Pits of Some Apricot Varieties
Physical and Mechanical Properties of Pits of Some Apricot Varieties
İ. GEZER, H. HACISEFEROĞULLARI, C. AYDIN, M.H. SONMETE, S. ÇALIŞIR, H.O. MENGEŞ
Anahtar Kelimeler : Physical and mechanical properties, apricot, pit, compression axis, rupture force, toughness.
Key Words : Physical and mechanical properties, apricot, pit, compression axis, rupture force, toughness.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Mechanical Properties of Sugarloaf
Mechanical Properties of Sugarloaf
S.H. HASHEMIFARD, J. KHAZAEI, S. MAVADDATI
Anahtar Kelimeler : Mechanical properties, sugarloaf, compression tests, modulus of elasticity, rupture force, energy.
Key Words : Mechanical properties, sugarloaf, compression tests, modulus of elasticity, rupture force, energy.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Study of Physical and Mechanical Properties of Rose Flower
Study of Physical and Mechanical Properties of Rose Flower
G.R. CHEGINI, S.H. HASHEMI FARD, M.H. KHOSHTAGHAZA
Anahtar Kelimeler : Rose flower, mechanical properties, shear, bending, compression.
Key Words : Rose flower, mechanical properties, shear, bending, compression.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Determining the Shear Strength and Picking Force of Rose Flower (Rosa hybrida L.)
Determining the Shear Strength and Picking Force of Rose Flower (Rosa hybrida L.)
S.H. HASHEMI FARD, G.R.CHEGINI, M. H. KIANMEHR
Anahtar Kelimeler : Rose flower, mechanical properties, shear, picking, stem
Key Words : Rose flower, mechanical properties, shear, picking, stem

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Some Mechanical Properties of Pomegranate Peel and Fruit
Some Mechanical Properties of Pomegranate Peel and Fruit
N. EKRAMI-RAD, J. KHAZAEI
Anahtar Kelimeler : Storage, firmness, cutting, force, energy, modulus of elasticity
Key Words : Storage, firmness, cutting, force, energy, modulus of elasticity

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Comparing of Different Tillage Systems in Terms of Sustainability for Silage Corn
Comparing of Different Tillage Systems in Terms of Sustainability for Silage Corn
Z.B. BARUT, H. A. KARAAĞAÇ
Anahtar Kelimeler : Tillage systems, silage corn, no-tillage
Key Words : Tillage systems, silage corn, no-tillage

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Selection of a Proper Model for Outdoor PV Module Characteristics Accuracy
Selection of a Proper Model for Outdoor PV Module Characteristics Accuracy
I. H. MAHAMMED, A. H. ARAB , F.Y. ETTOUMI, B. YAHIA
Anahtar Kelimeler : Photovoltaic module, characterization, outdoor measurement, modeling simulation.
Key Words : Photovoltaic module, characterization, outdoor measurement, modeling simulation.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A Study on the Development of a Wireless Climate Monitoring System
A Study on the Development of a Wireless Climate Monitoring System
A.KÜRKLÜ, N.ÇAGLAYAN
Anahtar Kelimeler : Wireless, microcontroller, radio modem, sensor, temperature
Key Words : Wireless, microcontroller, radio modem, sensor, temperature

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Factors Affecting the Development of Tractor Parks in Some Provinces
The Factors Affecting the Development of Tractor Parks in Some Provinces
G.ÖZTÜRK
Anahtar Kelimeler : Tractor parks of provinces, the factors affecting tractor sales
Key Words : Tractor parks of provinces, the factors affecting tractor sales

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A New Approach for Training of Building Energy Managers and Users in Sustainable Energy for Rural Areas
A New Approach for Training of Building Energy Managers and Users in Sustainable Energy for Rural Areas
Laurenţiu FARA, Jim HOPWOOD, Brian MARCER, Jan GEISS
Anahtar Kelimeler : renewable energy, energy efficiency, social dialogue, legislation, train the trainer
Key Words : renewable energy, energy efficiency, social dialogue, legislation, train the trainer

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Evaluation of the Effect oF Tillage Methods on Canola Yield and Income: Case Study of Golestan Province in Iran
Evaluation of the Effect oF Tillage Methods on Canola Yield and Income: Case Study of Golestan Province in Iran
N. ABYAR, H. SADEGHNEJAD
Anahtar Kelimeler : canola , tillage method , income , Iran
Key Words : canola , tillage method , income , Iran

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Determinations of Egg Shell Cracks Using a Pendulum Testing of Table Eggs
Determinations of Egg Shell Cracks Using a Pendulum Testing of Table Eggs
Cevat AYDIN, İskender YILDIRIM, Murat KÖKLÜ
Anahtar Kelimeler : ,
Key Words : ,

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Design and Development of Saffron Harvesting Machine
Design and Development of Saffron Harvesting Machine
E. Mirzaee,S. Abdolahpour, A. Ramazani, H. Sheibani
Anahtar Kelimeler : saffron, harvesting machine, head, design, knife
Key Words : saffron, harvesting machine, head, design, knife

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Energy Perspective for a Sustainable World
Energy Perspective for a Sustainable World
I. de Alencar NÄÄS, L. A. ROSS
Anahtar Kelimeler : Energy, renewable energy, agricultural production
Key Words : Energy, renewable energy, agricultural production

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Agricultural Automation and Bioenergy
Agricultural Automation and Bioenergy
K.C. TING
Anahtar Kelimeler : perception, reasoning & learning, communication, task planning & exceution, biomass feedstock production, biomass coversion to energy, systems informatics & analysis
Key Words : perception, reasoning & learning, communication, task planning & exceution, biomass feedstock production, biomass coversion to energy, systems informatics & analysis

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Soil Structure Formation and Management Effects on Gas Emission
Soil Structure Formation and Management Effects on Gas Emission
R. HORN
Anahtar Kelimeler : Aeration; Aggregate formation; Anoxia; Biomass; Carbon; Carbonates; Dissolved organic carbon; Hydraulic properties, Intra- aggregate pores; Modelling; Plant residues; Respiration; Root Exudates; Swelling; Shrinkage;
Key Words : Aeration; Aggregate formation; Anoxia; Biomass; Carbon; Carbonates; Dissolved organic carbon; Hydraulic properties, Intra- aggregate pores; Modelling; Plant residues; Respiration; Root Exudates; Swelling; Shrinkage;

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Tar ı m Makinalar ı Bilimi Dergisi (Journal of Agricultural Machinery Science) 2008, 4 (1), 27 - 32 27 200 HP Tractor - Zimbru Tr action Bar Testing in Dynamic Regime and Modelling with Finite Element (MEF)
Tar ı m Makinalar ı Bilimi Dergisi (Journal of Agricultural Machinery Science) 2008, 4 (1), 27 - 32 27 200 HP Tractor - Zimbru Tr action Bar Testing in Dynamic Regime and Modelling with Finite Element (MEF)
V. VLADUT, M. MATACHE, S. B Ă JENARU, S. BUNGESCU, S. BİRİS ,
Anahtar Kelimeler : testing, bar, tractor, regime , accelerated, finite elements
Key Words : testing, bar, tractor, regime , accelerated, finite elements

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Modernization of the Tumosan Tractor Diesel Engines by Using New Combustion Chamber
Modernization of the Tumosan Tractor Diesel Engines by Using New Combustion Chamber
K. OGUN T. GURBUZ O. BABAOGLU H. TUNCER R. MEHDIYEV H. ARSLAN O. A. KUTLAR
Anahtar Kelimeler : Diesel engine, combustion chamber (CC), performance, emissions
Key Words : Diesel engine, combustion chamber (CC), performance, emissions

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Moiré Aided Soil-Tractor Tire Contact Area and Contact Volume Determination
Moiré Aided Soil-Tractor Tire Contact Area and Contact Volume Determination
F. KUNINARI, I. M. DAL FABBRO, A.C.L. LINO C. de ALMEIDA
Anahtar Kelimeler : soil-tire contact area, soil-tire contact volume, moiré technique.
Key Words : soil-tire contact area, soil-tire contact volume, moiré technique.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Four Computer Programs to Design and Calculate Safety Structures for Old Agricultural Tr actors Lacking ROPS
Four Computer Programs to Design and Calculate Safety Structures for Old Agricultural Tr actors Lacking ROPS
I. ARANA, C. JAREN, S. ARAZURI, J. M. MANAGADO, J. R. ALFARO , J. L. PONCE DE LEÓN
Anahtar Kelimeler : overturn, homologation, test, safety
Key Words : overturn, homologation, test, safety

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Determining and Optimization of Mass, Stiffness and Damping Coefficients of Tractor Seat by Quasi-Newton Method Using Coupled Human-Seat Model
Determining and Optimization of Mass, Stiffness and Damping Coefficients of Tractor Seat by Quasi-Newton Method Using Coupled Human-Seat Model
H. H. A. ALIZADEH , A. SEDAGHAT, M. S. MEHR, D. NADERI
Anahtar Kelimeler : uasi-Newton optimization method, ST H transmissibility function; Transmitted acceleration ,Seat vibration ; coupled human- seat Model
Key Words : uasi-Newton optimization method, ST H transmissibility function; Transmitted acceleration ,Seat vibration ; coupled human- seat Model

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Alternative Fuelling of Diesel Engines With Diesel Fuel and Raw Vegetal Oils: Achievements, Problems and Perspectives
Alternative Fuelling of Diesel Engines With Diesel Fuel and Raw Vegetal Oils: Achievements, Problems and Perspectives
M.A. NICOLESCU
Anahtar Kelimeler : Diesel engine, biofuels, raw vegetal oils.
Key Words : Diesel engine, biofuels, raw vegetal oils.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Comparative Analysis of Two In jection Systems Fueled with Biodiesel
Comparative Analysis of Two In jection Systems Fueled with Biodiesel
R. ROSCA, I. TENU, B. AVARVAREI, P.CÂRLESCU, E.RAKOSİ, G.MANOLACHE
Anahtar Kelimeler : injection equipment, average injection rate, fuel delivery.
Key Words : injection equipment, average injection rate, fuel delivery.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Energetic Study on Animal Fa ts and Vegetable Oils Using Combustion Bomb Calorimeter
Energetic Study on Animal Fa ts and Vegetable Oils Using Combustion Bomb Calorimeter
I.GRAVALOS, T. GIALAMAS, Z. KOUTSOFITIS, D. KATERIS Z. TSIROPOULOS, P. XYRADAKIS, A. GEORGIADES
Anahtar Kelimeler : Animal fats, vegetable oils, alternative fuels, calorific value, combustion bomb calorimeter.
Key Words : Animal fats, vegetable oils, alternative fuels, calorific value, combustion bomb calorimeter.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Biofuel from Waste Palm Oil – An Analysis of its Properties and Comparisons with Other Biofuels
Biofuel from Waste Palm Oil – An Analysis of its Properties and Comparisons with Other Biofuels
M.A.KALAM, H.H. MASJUKI
Anahtar Kelimeler : Biofuel, Renewable energy, Engine pe rformance, Envo Diesel, Coconut oil.
Key Words : Biofuel, Renewable energy, Engine pe rformance, Envo Diesel, Coconut oil.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Efficient Machine Utilisation in Small and Medium Size Field Vegetable Production Farms
Efficient Machine Utilisation in Small and Medium Size Field Vegetable Production Farms
L. MAGÓ
Anahtar Kelimeler : mechanisation of small and medium sized field vegetable production farms, machine fleet planning, machine utilisation, low cost ma chine fleet, machine investment and usage cost
Key Words : mechanisation of small and medium sized field vegetable production farms, machine fleet planning, machine utilisation, low cost ma chine fleet, machine investment and usage cost

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Composing of Occupational Standard of Agricultural Tools and Machinery Mainte nance - Repair Technicians
The Composing of Occupational Standard of Agricultural Tools and Machinery Mainte nance - Repair Technicians
A. KILIÇKAN
Anahtar Kelimeler : Occupational standart, Agricultural tools and mach inery technicians, DACUM.
Key Words : Occupational standart, Agricultural tools and mach inery technicians, DACUM.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Accident Risk in Polish Farmers’ Work Environment
Accident Risk in Polish Farmers’ Work Environment
J. CIEŻ
Anahtar Kelimeler : agriculture, work, accident, risk level, Poland
Key Words : agriculture, work, accident, risk level, Poland

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Chop Length Capability and Wear ing Qualities for Two Types of Straw Chopper Knives at Combine Harvesting
Chop Length Capability and Wear ing Qualities for Two Types of Straw Chopper Knives at Combine Harvesting
G. LUNDIN
Anahtar Kelimeler : Combine, harvest, straw, chop, cut, knife, wear
Key Words : Combine, harvest, straw, chop, cut, knife, wear

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Comparation of Harvest Performanc es of Three Different Types of Hand Held Olive Canopy Shakers
Comparation of Harvest Performanc es of Three Different Types of Hand Held Olive Canopy Shakers
T.SARAÇOĞLU , E.ULUSOY , Ü. EVCİM
Anahtar Kelimeler : Olive, olive harvest mechaniz ation, olive canopy shaker
Key Words : Olive, olive harvest mechaniz ation, olive canopy shaker

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Variable Water Application Depths from a Centre Pivot Irrigation Control System
Variable Water Application Depths from a Centre Pivot Irrigation Control System
A. HEZARJARIBI , H. SOURELL
Anahtar Kelimeler : Site-specific, Variable rate, Centre pivot, Irrigation, A pplication uniformity
Key Words : Site-specific, Variable rate, Centre pivot, Irrigation, A pplication uniformity

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Optimization of Subirrigation Water Level in Humid and Arid Conditions
Optimization of Subirrigation Water Level in Humid and Arid Conditions
M. HAUTALA, M. HAKOJÄRVI
Anahtar Kelimeler : Monte Carlo, crop growth, subirrigation
Key Words : Monte Carlo, crop growth, subirrigation

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Band Spreading- A Sustainable Technology for Crop Fertilization and Irrigation
Band Spreading- A Sustainable Technology for Crop Fertilization and Irrigation
B. VERHÜLSDONK
Anahtar Kelimeler : ammonia emission, band spreading, liquid manure, slurry distribution, irrigation
Key Words : ammonia emission, band spreading, liquid manure, slurry distribution, irrigation

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Promotion of Photovoltaic Wate r Pumping System (PVPS) for Irrigation in Desert Regions (Ghardaia/Algeria)
Promotion of Photovoltaic Wate r Pumping System (PVPS) for Irrigation in Desert Regions (Ghardaia/Algeria)
A. BOUTELHIG , Y. BAKELLI,A. HADJ ARAB
Anahtar Kelimeler : (PVPS) Photovoltaic water Pumping System, Desert region, irrigation, livestock, stand alone system, solar irradiance, underground wate r source, characterization, test facility.
Key Words : (PVPS) Photovoltaic water Pumping System, Desert region, irrigation, livestock, stand alone system, solar irradiance, underground wate r source, characterization, test facility.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Precise Estimation of the Evapotranspiration Losses in Bulgaria – a Precondition for Water and Energy Conservation for the Economy
Precise Estimation of the Evapotranspiration Losses in Bulgaria – a Precondition for Water and Energy Conservation for the Economy
M. MOTEVA
Anahtar Kelimeler : net solar radiation, reference evapotranspiration, i rrigation scheduling, Bulgaria
Key Words : net solar radiation, reference evapotranspiration, i rrigation scheduling, Bulgaria

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Reduced Tillage and Direct Seeding Applications on Second Crop Maize and Sunflower*
Reduced Tillage and Direct Seeding Applications on Second Crop Maize and Sunflower*
HH.YALÇIN,E. ÇAKIR, E. AYKAS,İ.ÖNAL,E.GÜLSOYLU,B.OKUR,S.DELİBACAK, A.R.ONGUN,Y. NEMLİ,S.TÜRKSEVEN
Anahtar Kelimeler : Second crop sunflower, second crop corn, conservation tillage, direct seeding, weed.
Key Words : Second crop sunflower, second crop corn, conservation tillage, direct seeding, weed.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Effect of Soil Compacti on (Plough Pan) on Soybean Yield at Samsun Conditions
Effect of Soil Compacti on (Plough Pan) on Soybean Yield at Samsun Conditions
Y. PINAR, K.Ç. SELVİ, S.YILMAZ
Anahtar Kelimeler : Soil Compaction, Plow Pan, Cone-Index, Soybean.
Key Words : Soil Compaction, Plow Pan, Cone-Index, Soybean.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Energy Consumed for Barley Production in the Reclaimed Lands of Egypt
Energy Consumed for Barley Production in the Reclaimed Lands of Egypt
I.M.M. KHATER, M. M. A. HASSAN, B. YAŞAR
Anahtar Kelimeler : Tillage techniques, Energy consumed, Irri gation regime and Bulk density.
Key Words : Tillage techniques, Energy consumed, Irri gation regime and Bulk density.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Impact of Friction on the Plough Body Draft Resistance
Impact of Friction on the Plough Body Draft Resistance
A. VILDE, A. RUCINS
Anahtar Kelimeler : Plough body’s draft resistance, friction re sistance, analytic correlations, optimisation of parameters .
Key Words : Plough body’s draft resistance, friction re sistance, analytic correlations, optimisation of parameters .

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

The Effects of Differen t Types of Coating on the Wear of Ploughshare
The Effects of Differen t Types of Coating on the Wear of Ploughshare
A.T. PALALI, M.NALBANT
Anahtar Kelimeler : Metal coating, hard chromium, TiN, electroless nickel, wear, ploughshares
Key Words : Metal coating, hard chromium, TiN, electroless nickel, wear, ploughshares

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Technological Solutions to Pr oblems Associated with Application of Pesticides
Technological Solutions to Pr oblems Associated with Application of Pesticides
H. E. ÖZKAN
Anahtar Kelimeler : Pesticide application, sprayer, spray dr ift, nozzles, pesticide contamination.
Key Words : Pesticide application, sprayer, spray dr ift, nozzles, pesticide contamination.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Procedure for Testing Fiel d, Orchard and Vineyard Sprayers to Improve the Spray Distribution Uniformity
Procedure for Testing Fiel d, Orchard and Vineyard Sprayers to Improve the Spray Distribution Uniformity
G. BOLINTINEANU, M. MATACHE, V. VLADUT, E. UCEANU, I. VOICEA
Anahtar Kelimeler : plants protection, distribution, uniforemity, nozzle.
Key Words : plants protection, distribution, uniforemity, nozzle.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A Survey Study on Inspection of Field and Air-Assisted Orchard Sprayers in Use
A Survey Study on Inspection of Field and Air-Assisted Orchard Sprayers in Use
A. BAYAT, A. SOYSAL, A.S.ŞEN
Anahtar Kelimeler : Sprayer inspection, field and orchard sprayers, tst EN 13790-1, tst EN 13790-2
Key Words : Sprayer inspection, field and orchard sprayers, tst EN 13790-1, tst EN 13790-2

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Evaluation of Pesticides Losses During Cereal Crop Spraying in Tunisian Conditions
Evaluation of Pesticides Losses During Cereal Crop Spraying in Tunisian Conditions
H. BAHROUNI , C. SINFORT , E. HAMZA
Anahtar Kelimeler : Pesticide, deposit, drif t, emission, modelling.
Key Words : Pesticide, deposit, drif t, emission, modelling.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Biomass Potential and Availability for Energetic Use - Barriers and Drivers
Biomass Potential and Availability for Energetic Use - Barriers and Drivers
M. SZABÓ, I. BARÓTFI
Anahtar Kelimeler : RES, biomass potential
Key Words : RES, biomass potential

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Small Hydropower Plants - As Renewable Energy Resources
Small Hydropower Plants - As Renewable Energy Resources
A.VAIDELIENE , V. VAIDELYS, S. KADISA
Anahtar Kelimeler : Hydropower plant, small hydropower plant, “green” energy, discharge.
Key Words : Hydropower plant, small hydropower plant, “green” energy, discharge.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Utilization of Geothermal Heat fo r Air-Conditioning of Different Small Buildings
Utilization of Geothermal Heat fo r Air-Conditioning of Different Small Buildings
L.TÓTH, L. FOGARASI, G.BIHERCZ, A.MÉNESI
Anahtar Kelimeler : geothermal energy, air-conditioni ng, ground loop, heat-exchanger
Key Words : geothermal energy, air-conditioni ng, ground loop, heat-exchanger

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Comparative Analysis of a Wind Turbine’s Performances by Means of CFD Simulations
Comparative Analysis of a Wind Turbine’s Performances by Means of CFD Simulations
E. MAICAN, Sorin- Ş. BIRIŞ
Anahtar Kelimeler : CFD, wind turbine, Savonius, static torque, Shear Stress Transport
Key Words : CFD, wind turbine, Savonius, static torque, Shear Stress Transport

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A Novel Plan of Solar Greenho use for Deserts of Iran
A Novel Plan of Solar Greenho use for Deserts of Iran
D. ZARE
Anahtar Kelimeler : Iran’s deserts, solar greenhouse, cultivation and growth of plants, water distillation
Key Words : Iran’s deserts, solar greenhouse, cultivation and growth of plants, water distillation

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

A Comparative Study on Exer getic Efficiencies of Two Different Drying Processes
A Comparative Study on Exer getic Efficiencies of Two Different Drying Processes
F. İÇİER, N. ÇOLAK, Z. ERBAY, E. HANCIOĞLU,A.HEPBASLI
Anahtar Kelimeler : Drying, Exergy analysis, Parsley, Tray Dryer, Fluid-bed dryer.
Key Words : Drying, Exergy analysis, Parsley, Tray Dryer, Fluid-bed dryer.

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Reducing the Energy Consumptio n of Seed-corncob Drying by Means of a Thermal Analysis Method
Reducing the Energy Consumptio n of Seed-corncob Drying by Means of a Thermal Analysis Method
J. BEKE, Z. KURJÁK
Anahtar Kelimeler : seed-corncob drying, industrial drye r, hot air drying, convective drying
Key Words : seed-corncob drying, industrial drye r, hot air drying, convective drying

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Development of A Ro tary Drum Dryer to Dry Medicinal and Aromatic Plants
Development of A Ro tary Drum Dryer to Dry Medicinal and Aromatic Plants
S. TARHAN, S. YILDIRIM, M. Taner TUNCAY, İ. TELCİ
Anahtar Kelimeler : Medicinal plants, Aromatic plants, Drying kinetics, Rotary drum dryer
Key Words : Medicinal plants, Aromatic plants, Drying kinetics, Rotary drum dryer

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Appraisals on Poplar Harves ting Methods Through Energy Conservation Efficiency
Appraisals on Poplar Harves ting Methods Through Energy Conservation Efficiency
M. FEDRIZZI, F. GALLUCCI, A. CIRIELLO
Anahtar Kelimeler : SRF, harvesting machinery, energy preservation, wood storage
Key Words : SRF, harvesting machinery, energy preservation, wood storage

Özet Abstract

10. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi (14-17 Eylül 2008 Antalya)

Microparticle Formation of Et hyl Cellulose Using Compressed CO2 Antisolvent Precipitations
Microparticle Formation of Et hyl Cellulose Using Compressed CO2 Antisolvent Precipitations
L. CHEN, Z. LIU
Anahtar Kelimeler : Ethyl cellulose, compressed CO 2 , microparticle, GAS, SEDS
Key Words : Ethyl cellulose, compressed CO 2 , microparticle, GAS, SEDS

Özet Abstract